PTC - Tile Drilling Accessories

  • Product Code: PTC Accs
  • Availability: In Stock
$0.00 Ex Tax: $0.00

Everything required to ensure our tile drilling systems are driven, cooled and accurately located

 

 Water Delivery System

All PTC tools utilise Armeg's water feed pressure pump to ensure an effective and continuous flow of water to the cutting edge

 

PTC - Large Diamond Crown Drilling Accessories & Water Delivery

Features an integral attachment which the Water Feed Pressure Pump Pipe slots into. Water coolant is then driven internally to the Large Diamond Crown and directly to the cutting edge

 

Description Technical Information Part Number  
PTC Water Feed Pump  






PTCWFKIT






 
Water Feed Unit





Suitable for all diameters of PTC Small Diamond Crown and Diamond Grit Tile Drill






DGTDWF5-35   
PTC Driver Adaptor (13 - 58mm Crowns)







Drive adaptor for PTC Diamond Crown Drills 13 - 58mm








PTCPAD  

PTC Guide Pad Multi-Pack x 25

(6 - 10mm Crowns)






Adhesive guide pads for PTC Diamond Crown Drills 6 - 10mm





PTCMULTIPGP25   

PTC Guide Pad Multi-Pack x 100

(6 - 10mm Crowns)






Adhesive guide pads for PTC Diamond Crown Drills 6 - 10mm





PTCMULTIPGP100

User Instructions 

PTC Water Feed Pump

Filling

  • Unscrew and remove the pressure pump handle.
  • Fill the bottle with desired water or coolant mix.
  • Ensure not to fill bottle above maximum capacity level (approx 4/5 full).
  • Replace the pump handle and tighten to seal.

Pressurising

  • Operate the handle up and down to pressurise the bottle.
  • One pump of the handle is usually sufficient for most drilling operations.
  • Excessive pressure caused by unnecessary pumping of the handle results in large amounts of water being used.
  • If used with Armeg’s rebar drilling system more pressure is required before and during drilling.

Attachment to water feed adaptor

  • Insert open end of wand into the push-fit fitting of the relevant water feed adaptor until secure.
  • In the case of drill bits that do not require a water feed adaptor, the angled nozzle should be used to aim a jet directly at the cutting edge.

Spraying

  • To begin spraying, press down trigger. Release of trigger will stop spraying.
  • To begin constant spraying, press down trigger and push forward. Pull trigger backwards to stop constant flow.

Removal from water feed adaptor

  • Compress collar on water feed adaptor push-fit fitting and pull out wand.

After use

  • Release the pressure in the tank by pulling up the release valve.
  • Empty excess fluid.
  • In the case of coolant use, dispose of any excess coolant in the manner stated by the manufacturer.

Storage

  • Store in a dry airy location.
  • Ensure it is completely empty if it is to be stored in freezing conditions.

Tech-Tip

1 or 2 pumps on the Water Feed Pump handle should be sufficient for most applications and should avoid excessive amounts of water being used.

 

Water Feed Unit - Suitable for all diameters of PTC Small Diamond Crown and Diamond Grit Tile Drill

 

PTC Drive Adaptor - To be used in conjunction with PTC Diamond Crown Drills 13 - 58mm

  • Screw the desired crown onto the water feed adaptor. Tightly secure in the chuck of the power tool. Push the tube from the pressure sprayer (Part Number PTCWFKIT) into the fitting on the water feed sprayer.
  • With all the components assembled, place the guide rod into the 8mm hole in the tile. Open the water connection to allow water flow continuously.

PTC Guide Pad Multi-Pack

  • Mark the position of the desired hole.
  • Stick the guide pad onto the clean, dry tile. The corresponding size hole to the diamond crown should be selected in line with the mark.
  • Enter the diamond crown into the hole in the guide pad. Ensure a flow of cool water to the diamond crown and commence drilling.

Tech-Tip

The Diamond Crown Guide Pads are only designed to be used once and should be disposed of after use. When using the Guide Pads, make sure the tile is clean and dry for better adhesion.

 

 

 

 

 

 

 

Tags: PTCWFKIT, DGTDWF5-35, PTCPAD, PTCMULTIGP25, PTCMULTIGP100, Water Cooling, Adaptor, Plaster-backed tiles, Ceramic, Natural slate, Travertine, Marble, Granite, Quarry tiles, Porcelain, Waste pipe, Water feed pipes, Fising holes, Shower mixers, Flue passage, Extractor fans, cable entry / exit

Testimonials.

  • Nunc ac metus varius odio aliquam sollicitudin vel id lorem. Nulla accumsan ut arcu et rutrum. Maecenas facilisis, tellus ac varius auctor, odio nisi ornare lectus, non feugiat eros purus eu nulla. Proin sem mauris, condimentum in aliquam a, sollicitudin sed lacus. Vivamus pulvinar id sem ut elementum. Sed non mattis lectus. Praesent fringilla ligula vitae cursus convallis. In hac habitasse platea dictumst. Aliquam accumsan dolor et leo fringilla accumsan. Morbi lobortis eros et velit tincidunt, pharetra elementum mi placerat. Mauris euismod pharetra metus. Suspendisse enim eros, porttitor eget dignissim laoreet, consequat quis lectus. Proin dignissim imperdiet nibh, vitae imperdiet quam vulputate ac. Nam molestie nisl euismod mi pharetra convallis.

    Mrs Brown

  • Cras at leo ut quam vehicula pellentesque. Proin aliquam sapien vitae venenatis tincidunt. Fusce congue orci eu elit facilisis vulputate. In interdum eu justo sit amet faucibus. Cras ac commodo neque. Aliquam vulputate lacus lectus, vel posuere magna convallis sed. Nam urna massa, porttitor in rutrum eu, luctus vel nunc. Nunc porttitor vel odio at efficitur. In hac habitasse platea dictumst. Etiam ut lectus ac lectus aliquam porttitor. Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Praesent vel nisi in massa egestas gravida sed at quam. Morbi consequat fermentum est. Proin fringilla dolor pulvinar, molestie est sed, suscipit leo.

    Mr Test

  • Lorem ipsum dolor sit amet, consectetuer adipiscing elit

    Mr Test1

  • Lorem ipsum dolor sit amet, consectetuer adipiscing elit

    Mr Test2

Website design and build by Grey Matter | web design sheffield

Cookie Policy | Terms & Conditions | Returns Policy
VAT Number: 173339947
Registration number: 3827176