16mm x 600mm Cable Guide Drill Bit

  • Product Code: Cable Guiding Drill Bits
  • Availability: In Stock
$0.00 Ex Tax: $0.00

The one tool solution for guiding cables through cavity walls

Features: 

  • Premium Quality SDS Drill Bit Produced using our premium quality Sheffield manufactured Qfds drill bits for strength and durability
  • Precision Machined Cable Holes 2.5mm diameter precision machined holes in the drill shank and drill tip allow cables to be connected to the drill bit and simply pushed or pulled through the cavity
  • Elongated Drive Slot Elongated drive slot enables the cable hole to be drilled at the products strongest point for durability. Cables also lie flat in the recessed slot meaning wire can be smoothly pulled through walls without snagging
  • 400mm / 600mm Length Design Specifically designed to either 400mm or 600mm  length to enable access through a cavity wall 

Cable Guide Drill Bits can be used in: 

  • Brick & block constructed walls (not designed for engineering brick or concrete)
  • Thick & stone walls (16mm diameter)

Cable Guide Drill Bits are ideal for fitting cables including: 

  • TV Co-axial
  • Telephone
  • Electric / Power
  • Alarm System
  • Data
  • Large & multiple cable installation (16mm diameter)



 

Description Diameter Size mm Overall Length mm Working Length mm Part Number  
16mm x 600mm Cable Guide Drill Bit 16 600 510 CGS16.0X600

User Instructions 

Drill wall in normal manner taking care to avoid cables, pipes etc. whether hidden or not. 

“Brick-burst” can be minimised by switching to rotary only mode or applying less pressure for last portion of drilling. 

When drilled through the wall, re-drill moving the bit backwards and forwards through the hole to clear any debris and make a smooth internal hole. 

Be careful when handling drill bit after drilling as it may be hot at the tip end. 

Disconnect power from the drilling machine. 

Remove drill bit from drilling machine but leave the drill in the wall exposed at each side of the wall. 

Do not thread cable that is already connected to power supplies. 

Cable to be threaded can be tied onto drill bit using either the hole in the in the shank or the tip. 

For smoothest pull through attach cables as shown in diagrams below. 

Cable can be pushed or pulled through hole produced using the Cable Guide Bit. 

Only to be used on Brick and Block constructed walls. 

Do not use on engineering brick or concrete. 

Recommended Speed 

Recommended speed for Cable Guide Drill Bit is largely governed by the power tool itself. This is because the product is designed to be used in power tools where in the majority of cases there is no facility to regulate the speed (i.e. SDS Plus machines). 

Tech-Tip

If routing cable by using the hole near the carbide tip, please be aware that after drilling this end of the drill could be hot and should be allowed to cool before handling.

Recommended Speed

Recommended speed for Cable Guide Drill Bit is largely governed by the power tool itself. This is because the product is designed to be used in power tools where in the majority of cases there is no facility to regulate the speed (i.e. SDS Plus machines). 

Machine Recommendations


 

 

Tags: CGS16.0X600, Cable guiding, TV Co-axial, Telephone, Alarm system, Data, Cable installation, Breeze block, Soft brick, Drill bit, Cavity wall

Testimonials.

  • Nunc ac metus varius odio aliquam sollicitudin vel id lorem. Nulla accumsan ut arcu et rutrum. Maecenas facilisis, tellus ac varius auctor, odio nisi ornare lectus, non feugiat eros purus eu nulla. Proin sem mauris, condimentum in aliquam a, sollicitudin sed lacus. Vivamus pulvinar id sem ut elementum. Sed non mattis lectus. Praesent fringilla ligula vitae cursus convallis. In hac habitasse platea dictumst. Aliquam accumsan dolor et leo fringilla accumsan. Morbi lobortis eros et velit tincidunt, pharetra elementum mi placerat. Mauris euismod pharetra metus. Suspendisse enim eros, porttitor eget dignissim laoreet, consequat quis lectus. Proin dignissim imperdiet nibh, vitae imperdiet quam vulputate ac. Nam molestie nisl euismod mi pharetra convallis.

    Mrs Brown

  • Cras at leo ut quam vehicula pellentesque. Proin aliquam sapien vitae venenatis tincidunt. Fusce congue orci eu elit facilisis vulputate. In interdum eu justo sit amet faucibus. Cras ac commodo neque. Aliquam vulputate lacus lectus, vel posuere magna convallis sed. Nam urna massa, porttitor in rutrum eu, luctus vel nunc. Nunc porttitor vel odio at efficitur. In hac habitasse platea dictumst. Etiam ut lectus ac lectus aliquam porttitor. Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Praesent vel nisi in massa egestas gravida sed at quam. Morbi consequat fermentum est. Proin fringilla dolor pulvinar, molestie est sed, suscipit leo.

    Mr Test

  • Lorem ipsum dolor sit amet, consectetuer adipiscing elit

    Mr Test1

  • Lorem ipsum dolor sit amet, consectetuer adipiscing elit

    Mr Test2

Website design and build by Grey Matter | web design sheffield

Cookie Policy | Terms & Conditions | Returns Policy
VAT Number: 173339947
Registration number: 3827176